System solutions for steep slopes, supporting structures and abutments
Today Geosynthetic Reinforced Soil (GRS) systems can be found in a wide range of applications. As supporting structures, they primarily fulfil supporting and securing functions. Examples are retaining walls, slope protection or slope stabilisation. Reinforced soil can also be used to construct steep slopes and overhanging slopes of up to 110°. GRS retaining structures are convincing due to their high stability. They can be erected much faster than conventional methods. The time saving means lower labour costs, as less personnel and equipment are required. Because local soils are often used, additional material costs are low. Fortrac Systems combines GRS systems with various face solutions. In addition to purely visual purposes, these can also fulfil structural and and other functions. Targeted noise abatement can be achieved with noise barriers or noise protection walls, e.g. with Fortrac Gabion. Land restoration measures such as steep slopes that can be planted with vegetation can be solved with Fortrac Nature. Do you need a retaining wall in the water? Find out more about Fortrac Block. Are you looking for a quick and easy solution for your bridge abutment? Take a look at Fortrac Panel. This is just a selection of countless possible applications.
Retaining walls/steep slopes
Earth pressure relief
Prepare formation together with any necessary base area
for facing on subgrade of adequate bearing capacity.
Construct Fortrac-reinforced earthworks layer by layer, with or without geogrid wrap-around, as required. Depending on system, also incorporate formwork, erosion/wash-out protection, drainage and facing connection components etc.
Depending on system, install facing layer by layer in tandem with earthworks or connect to earthworks as the final operation. Facing may serve as the active component in structural system or simply be attached as a passive element.